ALTO TS108C 600W પાવર્ડ કોલમ એરે PA સ્પીકર સિસ્ટમ યુઝર મેન્યુઅલ

પરિચય

The ALTO TS108C is a compact, all-in-one column array PA speaker system designed for clear, room-filling sound. This system integrates an elevated line array, a built-in subwoofer, a three-channel digital mixer with reverb, and Bluetooth streaming capabilities. It is suitable for solo musicians, event DJs, and various venues requiring high-performance audio in a portable format.

Image: The ALTO TS108C speaker system, consisting of the subwoofer base, column array, and a branded carrying bag for the column components.

પેકેજ સામગ્રી

ખાતરી કરો કે નીચે સૂચિબદ્ધ બધી વસ્તુઓ તમારા પેકેજમાં શામેલ છે:

• TS108C Base Subwoofer
• 3x Columnar Array Attachments
• Shoulder Column Carry Bag
• 1.5M (4.9 ft.) Power Cable
• ઝડપી શરૂઆત માર્ગદર્શન
• સલામતી અને વોરંટી મેન્યુઅલ

સેટઅપ સૂચનાઓ

1. એસેમ્બલી

1. Place the TS108C Base Subwoofer on a stable, flat surface.
2. Carefully connect the three columnar array attachments to form the full column. Ensure each section clicks securely into place.
3. Insert the assembled column array into the designated slot on top of the subwoofer base.

2. પાવર કનેક્શન

• Connect the provided power cable to the AC input on the rear panel of the subwoofer.
• પાવર કેબલના બીજા છેડાને ગ્રાઉન્ડેડ ઇલેક્ટ્રિકલ આઉટલેટમાં પ્લગ કરો.
• વોલ્યુમની ખાતરી કરોtage selector switch (if present) is set to the correct voltage for your region (e.g., 115V or 230V).

3. પ્રારંભિક જોડાણો

The TS108C features a 3-channel digital mixer. Refer to the rear panel diagram for input locations.

Image: Close-up of the TS108C rear panel, highlighting the input channels (Ch 1, Ch 2) with XLR/TRS combo jacks, BT/AUX input, and MIX OUTPUT XLR connector.

• ચેનલ 1 અને 2: Use XLR or 1/4" TRS cables to connect microphones, instruments, or line-level devices.
• BT/AUX: For Bluetooth audio streaming or connecting external devices via a 1/8" (3.5mm) auxiliary cable.
• મિક્સ આઉટપુટ: Use an XLR cable to link to another TS108C unit or an external PA system.

ઓપરેટિંગ સૂચનાઓ

1. પાવરિંગ ચાલુ

After all connections are made, press the power switch located on the rear panel to turn on the unit. The power indicator light will illuminate.

2. Mixer Controls

Each input channel (Ch 1, Ch 2) features:

• નોબ મેળવો: Adjusts the input level for the connected device. Start with the gain low and gradually increase.
• રીવર્બ નોબ: Controls the amount of reverb effect applied to the channel.
• EQ Knobs (High/Low): Adjusts the treble and bass frequencies for tone shaping.
• ક્લિપ એલઇડી: Indicates when the input signal is too high. Reduce the gain if this LED illuminates consistently.

3. બ્લૂટૂથ જોડી

Image: A smartphone screen showing a music player interface, with a Bluetooth symbol indicating a wireless connection to the ALTO TS108C speaker system.

1. દબાવો જોડી button on the rear panel of the TS108C. The Bluetooth indicator will flash.
2. તમારા બ્લૂટૂથ-સક્ષમ ઉપકરણ (સ્માર્ટફોન, ટેબ્લેટ, વગેરે) પર, બ્લૂટૂથ સેટિંગ્સ પર નેવિગેટ કરો.
3. Select "ALTO TS108C" from the list of available devices.
4. Once paired, the Bluetooth indicator on the TS108C will glow solid.
5. Adjust the BT/AUX gain knob to control the volume of the Bluetooth audio.

4. DSP Speaker Modes

The TS108C offers four application-specific DSP modes to optimize sound for different scenarios:

• સામાન્ય: Standard flat frequency response.
• જીવંત: Optimized for live music performances.
• ડીજે: Enhanced bass and treble for DJ applications.
• કસ્ટમ: Allows for user-defined EQ settings via the Alto Pro App.

Select the desired mode using the dedicated button on the rear panel or through the Alto Pro App.

5. Alto Pro App Control

Image: Two smartphones displaying the Alto Pro App, illustrating the user interface for wireless control over mixer settings, EQ, and speaker modes.

The Alto Pro App (available for iOS and Android) provides wireless control over the TS108C's mixer and speaker functions. This includes:

• Changing DSP Speaker Use modes.
• EQ સેટિંગ્સને કસ્ટમાઇઝ કરી રહ્યા છીએ.
• Adjusting volume and EQ for each channel.
• અને વધુ.

Download the app from your device's app store and connect via Bluetooth for full control.

જાળવણી

1. સફાઈ

• સફાઈ કરતા પહેલા હંમેશા પાવર કેબલ ડિસ્કનેક્ટ કરો.
• બાહ્ય સપાટીઓ સાફ કરવા માટે નરમ, સૂકા કપડાનો ઉપયોગ કરો.
• ઘર્ષક ક્લીનર્સ, સોલવન્ટ્સ અથવા મીણનો ઉપયોગ કરવાનું ટાળો, કારણ કે આ ફિનિશને નુકસાન પહોંચાડી શકે છે.
• For grilles, use a soft brush or vacuum cleaner with a brush attachment to remove dust.

2. સંગ્રહ અને પરિવહન

Image: A person carefully disassembling the column array sections and placing them into the provided carrying bag, demonstrating the portability of the system.

• When not in use, store the TS108C in a cool, dry environment, away from direct sunlight and extreme temperatures.
• For transport, disassemble the column array and store it in the provided carrying bag.
• The subwoofer features a built-in handle for easy lifting and carrying.
• Protect the unit from impacts and excessive vibrations during transport.

મુશ્કેલીનિવારણ

વિશિષ્ટતાઓ

વોરંટી માહિતી

The ALTO TS108C is covered by a મર્યાદિત વોરંટી. For specific terms, conditions, and duration of the warranty, please refer to the included Safety & Warranty Manual or visit the official ALTO webસાઇટ. વોરંટી દાવાઓ માટે તમારી ખરીદીનો પુરાવો રાખો.

આધાર

For further assistance, technical support, or to download the latest version of the Alto Pro App, please visit the official ALTO Professional webસાઇટ:

www.altoproaudio.com

You may also contact ALTO customer service directly for support inquiries.

નોંધ: આ માર્ગદર્શિકામાં એમ્બેડ કરવા માટે ઉત્પાદન ડેટામાં કોઈ સત્તાવાર ઉત્પાદન વિડિઓઝ આપવામાં આવ્યા નથી.