1. પરિચય
The FLSUN S1 Pro is an advanced FDM Delta 3D printer designed for high-speed and high-precision additive manufacturing. It features an ultra-fast printing speed of up to 1200mm/s and an acceleration of 40,000mm/s², significantly reducing print times. Equipped with Klipper firmware, a 7-inch smart touch screen, and a 350℃ all-metal hotend, the S1 Pro supports a wide range of filaments, including high-performance engineering materials. Its large build volume of Φ320*320*430 mm³ accommodates substantial projects. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your FLSUN S1 Pro 3D Printer.
છબી 1.1: આગળ view of the FLSUN S1 Pro 3D Printer, showcasing its sleek design and enclosed build chamber.
2. બોક્સમાં શું છે
અનપેક કરતી વખતે, કૃપા કરીને ચકાસો કે બધા ઘટકો હાજર છે:
- FLSUN S1 Pro 3D Printer (main unit)
- ફિલામેન્ટ ડ્રાયર બોક્સ
- પાવર કેબલ
- યુએસબી કેબલ
- Tool Kit (various wrenches, screwdrivers, etc.)
- Sampલે ફિલામેન્ટ
- વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)
- ઝડપી પ્રારંભ માર્ગદર્શિકા
Image 2.1: The FLSUN S1 Pro 3D Printer and its included accessories, demonstrating its 95% pre-assembled state.
3. સેટઅપ સૂચનાઓ
The FLSUN S1 Pro is designed for quick setup, being 95% pre-assembled. The initial setup typically takes less than 10 minutes.
- અનપેકીંગ: પેકેજિંગમાંથી પ્રિન્ટર અને બધી એસેસરીઝ કાળજીપૂર્વક દૂર કરો.
- પ્લેસમેન્ટ: Place the printer on a stable, level surface in a well-ventilated area.
- વિધાનસભા: Install the door and glass panels as per the instructions in the detailed ઇન્સ્ટોલેશન મેન્યુઅલ (PDF).
- પાવર કનેક્શન: પાવર કેબલને પ્રિન્ટર અને યોગ્ય પાવર આઉટલેટ સાથે જોડો.
- પ્રારંભિક પાવર ચાલુ: Turn on the printer using the main power switch. The device will perform self-checks to ensure stability.
- સ્વચાલિત સ્તરીકરણ: The printer features automatic leveling. Follow the on-screen prompts on the 7-inch touch screen to initiate and complete the leveling process. This ensures optimal print bed calibration.
- ફિલામેન્ટ લોડિંગ: Load your desired filament into the filament dryer box and then guide it into the extruder as instructed on the display.
- નેટવર્ક કનેક્શન: Connect the printer to your local Wi-Fi network via the touch screen interface for remote monitoring and control.
For detailed visual instructions, please refer to the official ઇન્સ્ટોલેશન મેન્યુઅલ (PDF).
4. ઓપરેટિંગ સૂચનાઓ
4.1 User Interface and Control
The FLSUN S1 Pro utilizes a 7-inch Klipper firmware smart touch screen for intuitive control. The visual operation interface allows for smart adjustment and monitoring directly from the printer. Additionally, with advanced Microtac radar control and Wi-Fi connectivity, you can monitor and control your printer in real-time from mobile phones and PCs.
Image 4.1: Remote control and monitoring capabilities via the FLSUN World app on a mobile device.
- રીમોટ કંટ્રોલ: Manage your printers remotely from anywhere.
- Tap it, Print it, Like it: Start printing tasks with a quick tap on the FLSUN World app, utilizing cloud storage for G-code files.
- Monitor in Pocket: Real-time checking of your printing progress.
- Smart Reminder: Receive notifications when print errors occur.
૩.૩ છાપકામ પ્રક્રિયા
- Prepare Model: Use compatible slicing software (FLSUN Slicer V2.0 or other slicers like PrusaSlicer, Cura) to prepare your 3D model. Ensure settings are optimized for the S1 Pro's capabilities, including its high speed and acceleration.
- ટ્રાન્સફર File: Transfer the sliced G-code file to the printer via USB or Wi-Fi (FLSUN World app).
- પ્રિન્ટ શરૂ કરો: પસંદ કરો file on the touch screen or through the app and initiate the print.
- દેખરેખ: Utilize the built-in camera for real-time monitoring and time-lapse recording. The printer's low noise level (55dB) ensures a quiet operating environment.
- Power-Off Resume: In case of power interruption, the printer supports power-off continuous printing, resuming from where it left off. Vibration compensation further ensures print quality.
Image 4.2: Illustration of the FLSUN S1 Pro's epic speed capabilities: 1200mm/s max printing speed, 40000mm/s² max acceleration, and 110mm³/s peak flow rate.
Image 4.3: Key features for smooth and consistent printing, including AI-powered functions, auto-leveling, spaghetti detection, and perfect first layer adhesion.
Image 4.4: Advanced features like the Air Filter, Filament Dryer, Built-in camera, Intelligent Zoned Heating, and 16GB EMMC storage.
5. જાળવણી
Regular maintenance ensures the longevity and optimal performance of your FLSUN S1 Pro 3D Printer.
- સફાઈ: Regularly clean the print bed, nozzle, and internal components to prevent debris buildup. Use a soft cloth and appropriate cleaning solutions.
- એર ફિલ્ટર: The printer is equipped with a combined HEPA + activated carbon air filter. Check and replace the filter periodically as needed to maintain air quality and prevent odors.
- Filament Dryer Box: Ensure the filament dryer box is functioning correctly to keep your filament dry, which is crucial for print quality.
- નોઝલ નિરીક્ષણ: Periodically inspect the 0.4mm hardened steel nozzle for wear or clogs. Replace if necessary. The all-metal hot end can reach up to 350°C, supporting various high-temperature filaments.
- લુબ્રિકેશન: Refer to the detailed manual for any lubrication requirements for moving parts.
Image 5.1: Diagram illustrating the 350°C hotend, 50°C chamber, and 120°C hot bed for optimal material handling.
6. મુશ્કેલીનિવારણ
આ વિભાગ ઓપરેશન દરમિયાન તમને આવી શકે તેવી સામાન્ય સમસ્યાઓનું નિરાકરણ લાવે છે.
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| Print Not Sticking to Bed | Improper bed leveling, dirty print surface, incorrect bed temperature. | Re-run auto-leveling. Clean the print surface with isopropyl alcohol. Adjust hot bed temperature according to filament type (Max 120°C). |
| Filament Clogging | Dust in filament, incorrect hotend temperature, worn nozzle, heat creep. | Ensure filament is dry (use filament dryer). Verify hotend temperature (Max 350°C). Clean or replace nozzle. Check cooling fan operation. |
| "Spaghetti" Prints | Poor bed adhesion, model detaching, extrusion issues. | The S1 Pro features સ્પાઘેટ્ટી ડિટેક્શન. Ensure proper bed adhesion. Monitor print progress via the built-in camera. |
| પ્રિન્ટર જવાબ આપી રહ્યું નથી | Software glitch, loose connection, power issue. | Restart the printer. Check all cable connections. Ensure stable power supply. |
| નબળી પ્રિન્ટ ગુણવત્તા | Incorrect slicing settings, worn nozzle, vibration, wet filament. | Optimize slicing parameters. Replace nozzle if worn. The printer has કંપન વળતર; ensure it's active. Use filament dryer. |
Image 6.1: Features like the 55dB quiet fan and Power Off Resume Print (UPS) contribute to a reliable printing experience.
7. ટેકનિકલ વિશિષ્ટતાઓ
| શ્રેણી | સ્પષ્ટીકરણ | વિગતો |
|---|---|---|
| જનરલ | મહત્તમ પ્રિન્ટીંગ ઝડપ | 1200mm/s |
| મેક્સ એક્સિલરેશન | 40000mm/s² | |
| પીક ફ્લો રેટ | 110mm³/s | |
| વોલ્યુમ બનાવો | Φ320*320*430 mm³ (Maximum height of the cylinder: 383mm) | |
| ચેમ્બર | બંધ | |
| અવાજ સ્તર | 55dB | |
| ટૂલ હેડ | નોઝલ | 0.4mm Hardened Steel Nozzle (supports various nozzle sizes) |
| Max Hot End Temp | 350℃ | |
| ફિલામેન્ટ વ્યાસ | 1.75 મીમી | |
| ફિલામેન્ટ | સપોર્ટેડ ફિલામેન્ટ | Ideal: PLA, PETG, TPU. Satisfactory: ABS, ASA, PA, PC, PET. Capable: Carbon/Glass Fiber Reinforced PLA, PPS-CF, PPA-CF/GF. |
| Active Heating Dry Box | હા | |
| ફિલામેન્ટ ક્લોગ ડિટેક્શન | હા | |
| હીટબ .ડ | બિલ્ડ પ્લેટ | ટેક્ષ્ચર PEI પ્લેટ |
| Max Build Plate Temp | 120℃ | |
| સ્માર્ટ ઝોન હીટિંગ | Inner Circle Ø220mm, Outer Ring 220-320mm | |
| ઈલેક્ટ્રોનિક્સ | ડિસ્પ્લે | 7" Color Touch Screen |
| સંગ્રહ | 16GB EMMC, 32GB USB Flash | |
| પાવર સપ્લાય | 110-240V, 50/60Hz | |
| Modeન-મોડ પાવર વપરાશ | 400 વોટ | |
| સોફ્ટવેર | ફર્મવેર અપગ્રેડ | OTA (ઓવર-ધ-એર) |
| સ્લાઇસિંગ સોફ્ટવેર | FLSUN Slicer V2.0, Other Slicers | |
| સપોર્ટેડ OS | MacOS, વિન્ડોઝ | |
| લક્ષણો | મોનિટરિંગ ક Cameraમેરો | Realtime, Timelapse |
| ફિલામેન્ટ ડિટેક્શન | હા | |
| કંપન વળતર | હા | |
| ભંગાર શોધ | હા | |
| સ્પાઘેટ્ટી ડિટેક્શન | હા | |
| Screen Auto Sleep | હા | |
| Printer Auto Power Off | હા | |
| ઓટો-લેવલિંગ | હા | |
| પાવર લોસ પુનઃપ્રાપ્ત | Yes (Z lift, Backup Battery) | |
| એર ફિલ્ટર | HEPA + Activated Carbon | |
| ભૌતિક પરિમાણો | ઉત્પાદનના પરિમાણો (D x W x H) | 23.62"D x 34.25"W x 9.45"H (600mm x 870mm x 240mm approx.) |
| Physical Dimension (Printer) | 550*596*1030mm | |
| વસ્તુનું વજન | ૦.૬૬ પાઉન્ડ (આશરે ૦.૩૨ કિગ્રા) | |
| રંગ | કાળો |
Image 7.1: Comprehensive technical specifications for the FLSUN S1 Pro 3D Printer.
8. વોરંટી અને સપોર્ટ
FLSUN is committed to providing reliable products and excellent customer service.
- વળતર: The product is eligible for 30-day easy returns. Please refer to the retailer's return policy for specific details.
- ગ્રાહક આધાર: For technical assistance, troubleshooting, or warranty inquiries, please contact FLSUN Customer Support. You can often find support resources and contact information on the official FLSUN webસાઇટ પર અથવા રિટેલર દ્વારા જ્યાંથી ઉત્પાદન ખરીદવામાં આવ્યું હતું.
- સુરક્ષા યોજનાઓ: Extended protection plans, such as a 4-Year Protection Plan, may be available for purchase separately to provide additional coverage beyond the standard warranty.
- ઑનલાઇન સંસાધનો: ની મુલાકાત લો FLSUN Store on Amazon for additional product information, FAQs, and support.
