ફેન્ટેક્સ એક્લિપ્સ G400A ATX મિડ-ટાવર કમ્પ્યુટર કેસ યુઝર મેન્યુઅલ

પરિચય

The Phanteks Eclipse G400A is a high-performance ATX Mid-Tower computer case designed for optimal airflow and component compatibility. Featuring a tempered glass side panel and pre-installed D-RGB fans, it offers both aesthetic appeal and efficient cooling. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Eclipse G400A case.

Figure 1: Phanteks Eclipse G400A ATX Mid-Tower Computer Case (White)

સેટઅપ માર્ગદર્શિકા

1. અનપેકિંગ અને નિરીક્ષણ

Carefully remove the computer case from its packaging. Inspect the case for any signs of damage during transit. Ensure all accessories, including screws, cable ties, and the user manual, are present.

2. ઘટક સ્થાપન

The Eclipse G400A is designed for easy installation of your PC components. Follow these general steps:

• મધરબોર્ડ ઇન્સ્ટોલેશન: Install your ATX motherboard onto the pre-installed standoffs. Ensure proper alignment and secure it with screws. The case supports rear-side connector mainboards for a cleaner build.
• પાવર સપ્લાય યુનિટ (PSU) ઇન્સ્ટોલેશન: Install your PSU into the dedicated compartment at the bottom rear of the case. The case supports PSUs up to 270mm in length.
• સ્ટોરેજ ડ્રાઇવ ઇન્સ્ટોલેશન: The case supports 2x 2.5" SSDs and 2x 3.5" HDDs. Utilize the dedicated storage brackets and cable management tray for a clean setup.

Figure 2: Internal layout with highlighted storage and cable management areas

• ગ્રાફિક્સ કાર્ડ (GPU) ઇન્સ્ટોલેશન: Install your graphics card into the appropriate PCIe slot. The case supports large GPU cards and includes triple mid-plate 120mm fan locations for direct GPU cooling.
• રેડિયેટર અને ફેન ઇન્સ્ટોલેશન: The case comes with 4x M25-140 Gen2 D-RGB fans pre-installed. It offers dedicated 360mm radiator support in the top without restrictions.

Figure 3: Top radiator support and pre-installed 140mm D-RGB fans

Figure 4: Dedicated 120mm fan positions for direct GPU cooling

3. કેબલ મેનેજમેન્ટ

Utilize the dedicated cable management tool and Velcro ties provided to route and secure cables behind the motherboard tray. This ensures optimal airflow and a clean interior.

ઓપરેટિંગ સૂચનાઓ

1. પાવરિંગ ચાલુ

After connecting all internal components and external peripherals, connect the power cable to your PSU and a wall outlet. Press the power button located on the top I/O panel of the case to power on your system.

Figure 5: Front I/O Panel Layout

2. RGB લાઇટિંગ કંટ્રોલ

The pre-installed M25-140 Gen2 D-RGB fans feature addressable RGB lighting. Control the lighting effects through your motherboard's RGB software (if compatible with D-RGB/ARGB) or a dedicated Phanteks RGB controller (sold separately).

જાળવણી

1. સફાઈ

નિયમિત સફાઈ શ્રેષ્ઠ કામગીરી જાળવવામાં મદદ કરે છે અને તમારા ઘટકોનું આયુષ્ય લંબાવે છે.

• ડસ્ટ ફિલ્ટર્સ: The Eclipse G400A features ultra-fine performance mesh panels on the top, left, and right sides, acting as dust filters. Regularly remove and clean these filters using compressed air or a soft brush to prevent dust buildup.
• બાહ્ય: સોફ્ટ સાથે બાહ્ય સપાટીઓ સાફ કરો, ડીamp કાપડ. ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટ્સ ટાળો.

Figure 6: Removable front mesh panel and dust filter for easy cleaning

Figure 7: Disassembled panels demonstrating airflow and access for cleaning

2. Airflow Optimization

Ensure cables are neatly managed to avoid obstructing airflow. Periodically check fan operation to ensure they are spinning freely and quietly.

મુશ્કેલીનિવારણ

• સિસ્ટમ ચાલુ થતી નથી:
  • Check all power connections, including the PSU to wall outlet, PSU to motherboard (24-pin and CPU 8-pin), and front panel power switch header.
  • ખાતરી કરો કે PSU સ્વીચ 'ચાલુ' સ્થિતિમાં છે.
• પંખા ફરતા નથી / RGB પ્રકાશિત નથી:
  • Verify fan and RGB cables are correctly connected to the motherboard headers or a dedicated RGB controller.
  • Check motherboard BIOS/UEFI settings for fan control and RGB settings.
• Poor Airflow / High Temperatures:
  • Clean all dust filters and fans.
  • Ensure proper cable management to avoid airflow obstruction.
  • Verify fan orientation (intake/exhaust) for optimal airflow path.

ટેકનિકલ વિશિષ્ટતાઓ

વોરંટી અને આધાર

Phanteks products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official Phanteks webસાઇટ પર જાઓ અથવા તેમની ગ્રાહક સેવાનો સીધો સંપર્ક કરો. વોરંટી દાવાઓ માટે ખરીદીનો પુરાવો રાખો.

For further assistance, visit the official Phanteks support page: www.phanteks.com/support.html