VEKOOTO VK218

VEKOOTO VK218 12V કાર બેટરી ટેસ્ટર સૂચના માર્ગદર્શિકા

મોડલ: VK218

બ્રાન્ડ: VEKOOTO

1. પરિચય

The VEKOOTO VK218 is a professional 12V car battery tester designed to accurately assess the health of various 6V and 12V automotive batteries and charging systems. This device provides comprehensive analysis for battery status, cranking performance, and alternator charging output, making it an essential tool for vehicle maintenance.

મુખ્ય લક્ષણો:

  • 3-in-1 Testing Functions: બેટરી ટેસ્ટ, ક્રેન્કિંગ ટેસ્ટ અને ચાર્જિંગ ટેસ્ટ કરે છે.
  • વ્યાપક સુસંગતતા: Supports 6V and 12V batteries, including Regular Flooded, AGM Flat Plate, AGM Spiral, GEL, and EFB types.
  • ઉચ્ચ ચોકસાઈ: Provides reliable test results for battery health.
  • વપરાશકર્તા મૈત્રીપૂર્ણ ઈન્ટરફેસ: Features a 2.4-inch color LCD screen for clear menu navigation and easy operation.
  • પોર્ટેબલ ડિઝાઇન: અનુકૂળ ઉપયોગ અને સંગ્રહ માટે કોમ્પેક્ટ અને હલકો.
VEKOOTO VK218 12V Car Battery Tester with display showing menu options

Image 1.1: The VEKOOTO VK218 battery tester, displaying its main menu with options for Battery Test, Charging Test, Cranking Test, Motorcycle, Review, and Setup.

VEKOOTO VK218 tester compatible with cars, motorcycles, trucks, and boats

Image 1.2: The VEKOOTO VK218 tester is compatible with a wide range of vehicles, including cars, motorcycles, trucks, and boats, making it a versatile diagnostic tool.

2. સલામતી માહિતી

Please read and understand all safety instructions before operating the VEKOOTO VK218 battery tester. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Always wear eye protection and protective clothing when working near batteries.
  • Ensure the vehicle is in a well-ventilated area to prevent accumulation of explosive gases.
  • તણખા, જ્વાળાઓ અને ધૂમ્રપાન કરતી સામગ્રીને બેટરીથી દૂર રાખો.
  • બેટરી એસિડને સ્પર્શ કરવાનું ટાળો. જો સંપર્ક થાય, તો તરત જ પાણીથી કોગળા કરો અને તબીબી સહાય મેળવો.
  • Do not connect the tester to a battery that is visibly damaged or leaking.
  • Ensure the tester clamps are securely connected to the correct battery terminals (red to positive, black to negative) to prevent short circuits.
  • Do not operate the tester if it is damaged.

3. ઉત્પાદન ઘટકો

The VEKOOTO VK218 battery tester consists of the main unit and integrated test cables with alligator clamps.

  • મુખ્ય એકમ: Houses the 2.4-inch color LCD display, control buttons (EXIT, ENTER, Up, Down), and internal circuitry.
  • Test Cables: Permanently attached cables for connecting to the battery.
  • મગર Clamps: લાલ સી.એલamp for the positive (+) battery terminal and black clamp for the negative (-) battery terminal.
VEKOOTO VK218 battery tester showing its display, buttons, and attached red and black alligator clamps

Image 3.1: The VEKOOTO VK218 unit, illustrating its display, navigation buttons, and the robust red and black alligator clamps for battery connection.

4. Setup and Initial Connection

The VK218 tester is self-powered by the battery it is connected to, eliminating the need for external power sources or internal batteries. Ensure the battery terminals are clean before connection for accurate readings.

  1. બેટરી તૈયાર કરો: Ensure the vehicle's ignition is off and all accessories are turned off. Clean any corrosion from the battery terminals.
  2. Cl ને કનેક્ટ કરોamps: જોડો લાલ હકારાત્મક (+) clamp to the positive (+) battery terminal. Attach the કાળો ઋણ (-) clamp નકારાત્મક (-) બેટરી ટર્મિનલ પર.
  3. પાવર ચાલુ: The tester will automatically power on once correctly connected to a battery with sufficient charge.
VEKOOTO VK218 connected to a car battery for in-vehicle testing

Image 4.1: The VEKOOTO VK218 connected to a car battery, demonstrating the 'Battery in Vehicle' test mode for checking battery status, starting power, and alternator function.

Person connecting the VEKOOTO VK218 to a car battery

Image 4.2: A user connecting the VEKOOTO VK218 to a car battery, highlighting the ease of use and the clear 2.4-inch color LCD screen for diagnostics.

5. ઓપરેટિંગ સૂચનાઓ

5.1. મેનુ નેવિગેશન

Use the Up (▲) and Down (▼) arrow buttons to scroll through menu options. Press the ENTER button to select an option. Press the EXIT button to return to the previous menu or cancel an operation.

5.2. બેટરી ટેસ્ટ

This function assesses the overall health of the battery, including Cold Cranking Amps (CCA), State of Health (SOH), State of Charge (SOC), and voltage.

  1. From the main menu, select "Battery Test" and press ENTER.
  2. Select the battery type (e.g., Regular Flooded, AGM Flat Plate, GEL) using the Up/Down arrows and press ENTER.
  3. Input the battery's rated CCA (Cold Cranking Amps) value, usually found on the battery label. Press ENTER.
  4. The tester will perform the analysis and display the results, including CCA, SOH (State of Health), SOC (State of Charge), and voltage.
  5. Interpret the results:
    • GOOD-RECHARGE: Battery is in good condition but needs recharging.
    • બદલો: બેટરી બદલવાની જરૂર છે.
    • BAD CELL-REPLACE: One or more cells are faulty; replace the battery.
VEKOOTO VK218 display showing battery test results and battery type selection

Image 5.1: The VEKOOTO VK218 display showing a battery test result (e.g., STD: 450A CCA, SOH: 75%, SOC: 18%, R: 8.63 mΩ, 11.94V, GOOD-RECHARGE) and the battery type selection menu (Regular Flooded, AGM Flat Plate, AGM Spiral, GEL, EFB).

5.3. ક્રેન્કિંગ ટેસ્ટ

આ પરીક્ષણ વાહનની સ્ટાર્ટિંગ સિસ્ટમનું મૂલ્યાંકન કરે છે, જેમાં સ્ટાર્ટર મોટરનો પણ સમાવેશ થાય છે.

  1. From the main menu, select "Cranking Test" and press ENTER.
  2. Follow the on-screen prompts to start the vehicle's engine.
  3. The tester will record the minimum cranking voltage and cranking time.
  4. Interpret the results:
    • CRANKING LOW: Indicates a weak starter or battery.
    • CRANKING NORMAL: Starting system is functioning correctly.

5.4. Charging Test (Alternator Test)

This test assesses the vehicle's charging system, including the alternator, rectifier, and regulator.

  1. From the main menu, select "Charging Test" and press ENTER.
  2. Follow the on-screen prompts to start the engine and rev it to a specified RPM (e.g., 2500 RPM for 5 seconds).
  3. The tester will measure loaded voltage, અનલોડ કરેલ વોલ્યુમtage, and ripple voltage.
  4. Interpret the results:
    • NO-OUTPUT: Charging system is not producing sufficient voltage.
    • LOW OUTPUT: Charging system output is below optimal levels.
    • સામાન્ય: Charging system is functioning correctly.
    • HIGH OUTPUT: Charging system output is too high, potentially damaging the battery.
VEKOOTO VK218 display showing 3-in-1 testing functions: Battery Test, Cranking Test, and Charging Test results

Image 5.2: The VEKOOTO VK218 display illustrating the results from its three primary testing functions: Battery Test (CCA, SOH, SOC, Voltage), Cranking Test (Time, Max/Min Voltage), and Charging Test (Loaded, Unloaded, Ripple).

5.5. ફરીviewing Test Data

The tester can store previous test results for review.

  1. From the main menu, select "Review" and press ENTER.
  2. Use the Up/Down arrows to scroll through saved test results.

5.6. સેટિંગ્સ

The "Setup" menu allows you to configure various settings of the device.

  1. From the main menu, select "Setup" and press ENTER.
  2. Options may include language selection, backlight adjustment, and unit settings.
VEKOOTO VK218 showing compact design and multi-language support

Image 5.3: The VEKOOTO VK218's compact and portable design, also indicating its support for multiple languages including English, Spanish, and German, accessible via the setup menu.

6. જાળવણી

  • સફાઈ: Wipe the tester with a soft, damp કાપડ ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
  • સંગ્રહ: Store the device in a dry, cool place, away from direct sunlight and extreme temperatures. Keep the cables neatly coiled.
  • Clamp સંભાળ: ખાતરી કરો કે એલીગેટર clamps are clean and free of corrosion for optimal conductivity.

7. મુશ્કેલીનિવારણ

  • ટેસ્ટર ચાલુ થતું નથી: cl ખાતરી કરોamps are securely connected to the correct battery terminals. The battery may be too deeply discharged to power the device; try charging the battery first.
  • અચોક્કસ વાંચન: Check for clean battery terminals and secure clamp connections. Ensure the correct battery type and CCA value are entered.
  • સ્ક્રીન ખાલી અથવા સ્થિર છે: Disconnect the tester from the battery, wait a few seconds, and reconnect. If the issue persists, contact customer support.
  • "CRANKING LOW" or "NO-OUTPUT" results: These indicate potential issues with the battery, starter, or charging system. Further diagnosis or professional inspection may be required.

8. સ્પષ્ટીકરણો

મોડલ નંબરVK218
બ્રાન્ડVEKOOOTO
ભાગtage રેન્જ6V / 12V
સપોર્ટેડ બેટરી પ્રકારોરેગ્યુલર ફ્લડેડ, AGM ફ્લેટ પ્લેટ, AGM સ્પાઇરલ, GEL, EFB
ડિસ્પ્લે૧.૭૭-ઇંચ કલર એલસીડી
પાવર સ્ત્રોતBattery powered (from vehicle battery)
પરિમાણો (L x W x H)8 x 1.8 x 13.4 સેમી (3.15 x 0.71 x 5.28 ઇંચ)
વજન240 ગ્રામ (0.53 lbs)

9. વોરંટી અને સપોર્ટ

For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official VEKOOTO webસાઇટ. ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.

સંબંધિત દસ્તાવેજો - VK218

પ્રિview VEKOOTO N72 બેકઅપ કેમેરા સિસ્ટમ 7" મોનિટર અને DVR સાથે - વપરાશકર્તા માર્ગદર્શિકા અને ઇન્સ્ટોલેશન માર્ગદર્શિકા
VEKOOTO N72 બેકઅપ કેમેરા સિસ્ટમ માટે વ્યાપક ઓપરેટિંગ સૂચનાઓ અને ઇન્સ્ટોલેશન માર્ગદર્શિકા, જેમાં 7" મોનિટર અને DVR છે. વાયરિંગ, સેટઅપ, કાર્યો અને મુશ્કેલીનિવારણ વિશે જાણો.
પ્રિview VEKOOTO SW5-1 પોર્ટેબલ બેકઅપ કેમેરા 5" મોનિટર સાથે - ઓપરેટિંગ સૂચનાઓ અને ઇન્સ્ટોલેશન માર્ગદર્શિકા
VEKOOTO SW5-1 પોર્ટેબલ બેકઅપ કેમેરા સિસ્ટમ માટે વ્યાપક ઓપરેટિંગ સૂચનાઓ અને ઇન્સ્ટોલેશન માર્ગદર્શિકા, જેમાં 5-ઇંચ મોનિટર, બિલ્ટ-ઇન બેટરી અને સોલાર પેનલ છે. તેમાં સ્પષ્ટીકરણો, પેકેજ સામગ્રી, ઇન્સ્ટોલેશન પગલાં અને મુશ્કેલીનિવારણ FAQ શામેલ છે.
પ્રિview VEKOOTO સોલર મેગ્નેટિક વાયરલેસ બેકઅપ કેમેરા યુઝર મેન્યુઅલ
VEKOOTO સોલર મેગ્નેટિક વાયરલેસ બેકઅપ કેમેરા માટે વપરાશકર્તા માર્ગદર્શિકા, જેમાં 2.4GHz Wi-Fi અને 9600mAh બેટરી છે. સેટઅપ સૂચનાઓ, તકનીકી વિશિષ્ટતાઓ અને મુશ્કેલીનિવારણ ટિપ્સ શામેલ છે.
પ્રિview VEKOOTO SO1 સોલર મેગ્નેટિક વાયરલેસ બેકઅપ કેમેરા યુઝર મેન્યુઅલ - 2.4GHz Wi-Fi, 9600mAh બેટરી
VEKOOTO SO1 સોલર મેગ્નેટિક વાયરલેસ બેકઅપ કેમેરા માટે વ્યાપક વપરાશકર્તા માર્ગદર્શિકા. 9600mAh બેટરીવાળા આ 2.4GHz Wi-Fi કેમેરા માટે ઇન્સ્ટોલેશન, સેટઅપ, સુવિધાઓ, સ્પષ્ટીકરણો, મુશ્કેલીનિવારણ અને ગ્રાહક સપોર્ટ વિશે જાણો.
પ્રિview VEKOOTO SW7-1 મેગ્નેટિક વાયરલેસ બેકઅપ કેમેરા 7" મોનિટર કીટ યુઝર મેન્યુઅલ
VEKOOTO SW7-1 મેગ્નેટિક વાયરલેસ બેકઅપ કેમેરા 7" મોનિટર કીટ માટે વ્યાપક વપરાશકર્તા માર્ગદર્શિકા. તમારા વાહનના બેકઅપ કેમેરા સિસ્ટમ માટે ઇન્સ્ટોલેશન, સુવિધાઓ, વિશિષ્ટતાઓ અને મુશ્કેલીનિવારણ વિશે જાણો.