Mitel Open Scape 4000 Software Manager

નોટિસ

આ દસ્તાવેજમાં સમાવિષ્ટ માહિતી બધી રીતે સચોટ હોવાનું માનવામાં આવે છે પરંતુ Mitel Europe Limited દ્વારા તેની ખાતરી આપવામાં આવતી નથી. આ માહિતી સૂચના વિના ફેરફારને પાત્ર છે અને તેને Mitel અથવા તેના કોઈપણ આનુષંગિકો અથવા પેટાકંપનીઓ દ્વારા પ્રતિબદ્ધતા તરીકે કોઈપણ રીતે અર્થઘટન ન કરવી જોઈએ. Mitel અને તેના આનુષંગિકો અને પેટાકંપનીઓ આ દસ્તાવેજમાં કોઈપણ ભૂલો અથવા ભૂલો માટે કોઈ જવાબદારી લેતા નથી. આવા ફેરફારોને સમાવિષ્ટ કરવા માટે આ દસ્તાવેજના સુધારા અથવા તેની નવી આવૃત્તિઓ જારી કરી શકાય છે. Mitel Networks Corporation ની લેખિત પરવાનગી વિના આ દસ્તાવેજના કોઈપણ ભાગને કોઈપણ સ્વરૂપમાં અથવા કોઈપણ માધ્યમથી - ઇલેક્ટ્રોનિક અથવા મિકેનિકલ - કોઈપણ હેતુ માટે પુનઃઉત્પાદિત અથવા પ્રસારિત કરી શકાતી નથી.

ટ્રેડમાર્ક્સ

Mitel ની ઇન્ટરનેટ સાઇટ્સ પર અથવા તેના પ્રકાશનોમાં દેખાતા ટ્રેડમાર્ક્સ, સર્વિસ માર્ક્સ, લોગો અને ગ્રાફિક્સ (સામૂહિક રીતે "ટ્રેડમાર્ક્સ") Mitel Networks Corporation (MNC) અથવા તેની પેટાકંપનીઓ (સામૂહિક રીતે "Mitel"), Unify Software and Solutions GmbH & Co. KG અથવા તેના આનુષંગિકો (સામૂહિક રીતે "Unify") અથવા અન્યના નોંધાયેલા અને બિનનોંધાયેલા ટ્રેડમાર્ક છે. Mitel અને/અથવા Unify ની સ્પષ્ટ સંમતિ વિના ટ્રેડમાર્ક્સનો ઉપયોગ પ્રતિબંધિત છે. કૃપા કરીને અમારા કાનૂની વિભાગનો સંપર્ક કરો iplegal@mitel.com પર ઇમેઇલ મોકલો. વધારાની માહિતી માટે. વિશ્વવ્યાપી Mitel અને Unify રજિસ્ટર્ડ ટ્રેડમાર્ક્સની સૂચિ માટે, કૃપા કરીને સંદર્ભ લો webસાઇટ: http://www.mitel.com/trademarks.

© કૉપિરાઇટ 2024, Mitel Networks Corporation

સર્વાધિકાર આરક્ષિત

ઉપરview

The SWM (Software Manager) is part of the OpenScape 4000 Assistant/ Manager. It is a tool for transferring the following Hotfixes and Releases via a TCP/IP network:

• CSTA HotFixes,
• Platform Hot Fixes,
  RMX Hotfixes,
• Assistant/Manager Hotfixes,
• Loadware HotFixes,
• Fix Releases
• Minor Releases
• Major Releases

SWM will allow the user to upload software to his system (Assistant or Manager) from a local computer or direct download it via internet from SWS.

સક્રિયકરણ

Transferred and downloaded packages can be activated (installed) by the

• “Software Activation” application (SWA)

Starting SWM

To start Software Manager, select from the OpenScape 4000 Assistant/Manager start page: Software Management -> Software Manager

મુખ્ય વિન્ડો

After the start of Software Manager the main window of the application is displayed.

The main page of SWM is composed of:

• હેડર બાર
  • સેટિંગ્સ: Set the required data for a connection to SWS.
  • ડાયગ્નોસ્ટિક્સ: Open/Save diagnostics information
  • મદદ: Open Help window
  • લૉગઆઉટ: Leave current working sessions
• Functional bar
  • અપલોડ કરો File: Load software packages from client PC into application
  • દૂર કરો File: Remove transferred software package from OpenScape 4000 storage
  • સ્થાનાંતરણ: Transfer selected package from client PC to OpenScape 4000
  • SWS: Browse and filter SWS packages, according to currently active versions
  • SWS Download: Download software packages from SWS to OpenScape 4000 system
• ઉપરview of packages loaded into application.
  આ ઓવરview has two sections:
  • પેકેજો – contains packages prepared for transfer and packages already transferred on OpenScape 4000.
  • SWS: contains a list of packages that can be downloaded to the system.
• પ્રગતિ પટ્ટી
  એકંદરેview of the transfer or download.

સૂચના: Running transfer or download can be canceled using the Cancel button.

NOTICE: IMPORTANT: Files that are loaded into application with the “Upload File” button, are not transferred directly into OpenScape 4000. The transfer must be done separately via the “Transfer” button. It is the same for the files added via SWS, they need to be downloaded via SWS Download in order to have them on the system.

સ્ટેપ બાય સ્ટેપ

Perform SWS settings 

Before using SWS, you must configure SWM settings. Initially, SWS button is disabled, but after the settings are done, SWS button will become available and you can choose software packages for download.

1. Press the “Settings” button from header bar.
   
2. સેટિંગ્સ મેનૂ
   
3. Proxy section
   a) A http proxy server can be optionally configured.
   IP and FQDN are supported. In case of FQDN a DNS Server, IP must be configured.
   If a Proxy Port is not configured the default 80 will be used.
   
   b) After saving the data, a connection test will be performed automatically.
   
4. Account configuration section
   a) After a successful connection test, we can configure the account for SWS.
   
   b) When the Authentication is performed, after a few seconds, a token is generated. This will be used for further authentications without entering the account details each time.
   c) The token can be revoked by pressing “Revoke token” button.

Upload Software package

You can add the software package from the client PC into the application:

1. Press the “Upload file” બટન
   
2. Either drag and drop the file into designated area OR navigate to the file using the “Choose Files" બટન.
   
   
   જ્યારે ધ file is uploaded, you will obtain information about its validity.
3. અપલોડ કરવા માટે file to the main screen, press the “Add” button.
   
4. You can see the package as a part of the main table (Packages section).
   

સૂચના: A major OS4K upgrade can be made by transferring the RLC together with all the available hot fixes of this release via SWM.

To add all the relevant fileઅપગ્રેડ માટે:

• Click the Browse button, navigate to the desired folder in your local storage and select the files to be added.
  or
•  Drag and drop a single file or multiples files together in the Drag & Drop area.
  
  તમામ files added will be listed under the Added files section, as displayed in the figure below:
  

Transfer the software package

1. પસંદ કરો file that you want to be transferred to OpenScape 4000 by selecting the respective checkbox.
   સૂચના: Currently, only single software package transfer is supported.
   
2. શરૂ કરવા માટે file transfer, click the “Transfer” icon.
   
3. The status of the transfer of each file is displayed in “State” column.
4. The overall status is displayed within the progress bar.
   When the Internet connection is not available, a notification is displayed in the progress bar.
   
   When there is an error on the server side, the following message is displayed in the progress bar.
   
5. When the transfer is successfully finished, the package changes its state to “Activation ready”.

સૂચના: Transfer of Major/Minor/Fix Release to Assistant initiates Background installation of the transferred package.

Remove transferred software package

1. Chose packages you want to remove.
   સૂચના: Only transferred packages can be removed.
   
2. Press the “Remove File” બટન.
3. ક્રિયાની પુષ્ટિ કરો.

Choose packages from SWS

1. Press the “SWS” button
   સૂચના: Only if you are authenticated (see SWS settings).
   
2. SWS popup menu is displayed.
   SWS
   ઉપલબ્ધ છે files
   
3. Based on what is already active on the system, a list will be generated. This will include the latest HF’s that are newer than what’s already on the system. The last HF of each category will be preselected. But based on the preferences this can be changed by the user.
4. Sorting can be done by category, using the included drop down.
   
5. A refresh of the list can be triggered at any time in order to have the latest info from the SWS server.
6. After the selection has finished, the packages can be added to the SWM menu by using the “Add to list” button
7. The packages will be now listed under the SWS section of SWM.

Download the software package from SWS

1. A second selection can be done in case the user wants to change something in the last minute.
   સૂચના: Single and multiple software packages downloads are supported.
2. To start the transfer on the system, the “SWS Download” button will be used.
   
3. The download status of each file is displayed in “State” column.
4. The overall status can be checked in the progress bar. Also, from here the download can be canceled. When the download has finished the selected packages will be available under the “Packages” section, in status “Activation ready”.
   

મુશ્કેલીનિવારણ

ઉપલબ્ધ ક્રિયાઓ

Package state	ઉપલબ્ધ ક્રિયાઓ	વર્ણન
Ready to Transfer	ટ્રાન્સફર	Package is able to be transferred.
ડાઉનલોડ કરવા માટે તૈયાર	ડાઉનલોડ કરો	Package is able to be downloaded.
Ready to Activate	કાઢી નાખો	Package is available on server, it can be deleted or activated (in SWA).
સક્રિય	કાઢી નાખો	Package is available on server and it is activated.

Packages locations 

મદદનીશ

પેકેજ પ્રકાર	સિસ્ટમ સ્થાન
Major Release	/.AS/SWS/RLC
Minor Release	/.AS/SWS/RLC
Fix Release	/.AS/SWS/RLC
RMX Hotfix	/.AS/SWS/PP
CSTA Hotfix	/.AS/SWS/csta_hf
PLT Hotfix	/.AS/SWS/os4kplt_hf
LW Hotfix	/.AS/SWS/LW_HF
Assistant Hotfix	/var/hf

મેનેજર

પેકેજ પ્રકાર	સિસ્ટમ સ્થાન
Major Release	/.AS/SWS/PP
Minor Release	/.AS/SWS/PP
Fix Release	/.AS/SWS/PP
Assistant Hotfix	/var/hf

FAQs

What will happen when the Internet connection is interrupted during the file ટ્રાન્સફર?

The SWM will try to reconnect for 30 seconds and a notification message will be displayed in the Progress bar.

If the connection is up again during that time, the file transfer will resume.

When the reconnecting is not successful, the Progress bar will display Internal Server error and the transfer attempt will be terminated.

What will happen when the user is trying to drag and drop more than one file?

This option is currently supported.

How to proceed when the user wants to transfer a different package than the one that is in “Ready to transfer” state.

Add the correct software package. It will replace the one in “Ready to transfer” state.

What will happen when the user wants to download multiple packages on the same type, from the main SWS section?

It will download the package containing the latest version.

What will happen when no files are on server on initial load? 

The message “No data on server, please add file” will appear in the GUI instead of the table. The user can add a new file.

What will happen when no files are selected from SWS popup and added on the SWS section from the overview?

The same case applies to the SWS section. If no packages were added, message: “No data in the list. Please add via SWS” is displayed. The user can proceed and add packages via SWS option.

What will happen when SWS packages are downloaded?

While the download or the preparation after download are still in progress, the packages are displayed within SWS table.

When the preparation will finish, the packages are displayed within Packages table, after an internal refresh of the packages list.

How to cancel a SWS download?

A current download can be canceled by pressing the “X” button beside the progress bar.

How to update the list of packages ready to be downloaded, from SWS section of the main overview?

Press “SWS” button and choose other packages and then press “Add to list” button.

What will happen if the user adds a package that is not valid? 

The user will see an error message after the addition of a package. Then, the user should add the correct package.

What will happen if the user adds a non software package file? 

An error message will be displayed after addition of the file. The user should add a correct software package.

How to check why a package is not transferable

Why the transferred packages are not displayed in Software Manager overview વિભાગ?

If there is any software package transferred out of the Software Manager (e.g. via SCP, SFTP, HiSPA, Manager,…), it might happen that SWM does not see it. It does complete scan during initial page load. However, this is not done if there is any Software Activation or HBR Backup running. It this case, please wait until it finishes and opens the Software Management page again.

I see the “Server is not available at the moment, please try again later” message on the main page.

Software Management service can be temporarily stopped during some actions like Software Activation. Just wait until it is finished and try again.

Why do I have to confirm the Software Manager page leave? 

This happens when the Software Manager page is uploading a package. If you would leave, the upload would be interrupted. To avoid this unwanted interruption, the confirmation window is displayed.

Once the upload is finished, the server stops to display the confirmation window because leaving the page does not impact the transfer result anymore.

Why do I see the package uploading even if I did not initiate any transfer? 

This happens because the transfer was initiated by some other client. The clients that did not initiated the transfer, are only displaying the progress. Thus, the Function bar (Remove file, Transfer) is locked and the transfer can be canceled only from the client who initiated the transfer.

How to check why a package is not transferable

Detection is done automatically during adding file into application. Warning dialog is displayed in case that package is not transferable.

How to access the SWS packages (“SWS” button enabled) 

Software Release Management versioning 

Va Rb.c.d

a – Major Release Number
b – Minor Release Number
c – Fix Release Number
d – HotFix Number

Va Rb.c – Release Number

Major/Minor/Fix release transferability package is transferable when it has higher version than Platform and no system (Assistant/Manager/CSTA/RMX/ Platform) version is mentioned in package blacklist.

Manager/ Assistant/Platform/CSTA/ RMX HotFix transferability package is transferable when it has the same release number as the corresponding system release and the HotFix number is higher than the corresponding system (Assistant/Manager/CSTA/RMX/Platform)) HotFix number.

Loadware HotFix transferability 

The package is transferable if it has the same release number as RMX system release.

Major/Minor/Fix release package includes: 

• version.info - આ file contains the version of Assistant, RMX, Platform and CSTA which will be created from RLC.
• blacklist.info (optional) – this file contains the version of Assistant/RMX/ Platform/CSTA from which the RLC activation is NOT allowed.

Cancel running transfer 

Running transfer can be canceled by pressing the Cancel button. The process will finish the currently running transfer task and will not initiate the next one.

How to access the SWS packages (“SWS” button enabled)

The SWS URL is predefined in the SWM SW.

In case of direct Internet access connection, a DNS server IP has to be configured (Webમિનિટ).

In case the http traffic is routed via a http proxy in the IT network, the proper proxy configuration is necessary. The proxy Server can be configured as (F)QDN (Fully Qualified Domain Name) or as IP address, in case of IP address for proxy the DNS configuration is optional.

A configuration will be successful when a token will be generated. At this point the user can proceed on adding packages from SWS.

સૂચના: The proxy port is optional, in case the field is left empty the default “80” will be used.

ગ્રાહક આધાર

A31003-H34B0-M127-01-76A9, 07/2024
OpenScape 4000 Assistant/Manager, Software Manager, Administrator Documentation

© 2024 Mitel Networks Corporation. સર્વાધિકાર સુરક્ષિત. Mitel અને Mitel લોગો Mitel Networks Corporation ના ટ્રેડમાર્ક છે. Unify અને સંકળાયેલા ચિહ્નો Unify Software and Solutions GmbH & Co. KG ના ટ્રેડમાર્ક છે. અહીં આપેલા અન્ય તમામ ટ્રેડમાર્ક તેમના સંબંધિત માલિકોની મિલકત છે.

Mitel.com

દસ્તાવેજો / સંસાધનો

Mitel Open Scape 4000 Software Manager [પીડીએફ] વપરાશકર્તા માર્ગદર્શિકા A31003-H34A0-M124-04-00A9, Open Scape 4000 Software Manager, 4000 Software Manager, Software Manager

સંદર્ભો

• વપરાશકર્તા માર્ગદર્શિકા