Solid Series Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Solid Series products.

Tip: include the full model number printed on your Solid Series label for the best match.

Solid Series manuals

આ બ્રાન્ડ માટે નવીનતમ પોસ્ટ્સ, ફીચર્ડ મેન્યુઅલ અને રિટેલર-લિંક્ડ મેન્યુઅલ tag.

SoliTek SOLID Series Solar Modules Installation Guide

17 એપ્રિલ, 2026
SoliTek SOLID Series Solar Modules Usage Instructions Read this guide entirely before installation. This document provides minimum requirements and recommendations for safe and successful installation of SoliTek PV modules and is necessary to retain compliance with IEC 61215, IEC 61730,…

ડાર્કગ્લાસ સોલિડ સિરીઝ માઇક્રોટ્યુબ્સ B7K v2 એનાલોગ બાસ પ્રીamp વપરાશકર્તા માર્ગદર્શિકા

સપ્ટેમ્બર 11, 2024
ડાર્કગ્લાસ સોલિડ સિરીઝ માઇક્રોટ્યુબ્સ B7K v2 એનાલોગ બાસ પ્રીamp Specs Controls Blend: Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level…

ડાર્કગ્લાસ ઇલેક્ટ્રોનિક્સ માઇક્રોટ્યુબ્સ X7 બાસ પ્રીamp પેડલ યુઝર મેન્યુઅલ

સપ્ટેમ્બર 11, 2024
ડાર્કગ્લાસ ઇલેક્ટ્રોનિક્સ માઇક્રોટ્યુબ્સ X7 બાસ પ્રીamp Pedal Product Information Specifications: High Pass Frequency: Controls the cutoff frequency for distortion, ranging from 100Hz to 1kHz. High Drive: Sets the amount of distortion for the high-pass side. High Level: Sets the output…

ડાર્કગ્લાસ સોલિડ સિરીઝ આલ્ફા ઓમેગા વપરાશકર્તા માર્ગદર્શિકા

સપ્ટેમ્બર 11, 2024
ડાર્કગ્લાસ સોલિડ સિરીઝ આલ્ફા ઓમેગા પ્રોડક્ટ ઇન્ફર્મેશન સ્પેસિફિકેશન ઇનપુટ ઇમ્પીડેન્સ: 1M આઉટપુટ ઇમ્પીડેન્સ: 1k વર્તમાન વપરાશ: ~30mA વોલ્યુમtage: 9V DC (Center Negative) Dimensions Width: 94 mm/3.7" Length: 120 mm/4.72" Height: 46 mm/1.81" Weight: 320 g/0.7 lb Product Usage Instructions Controls…

ડાર્કગ્લાસ સોલિડ સિરીઝ વિનtagડીલક્સ વપરાશકર્તા માર્ગદર્શિકા

સપ્ટેમ્બર 11, 2024
ડાર્કગ્લાસ સોલિડ સિરીઝ વિનtage Deluxe Specs Controls Blend: Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine…