ઝિગ્બી લોગોસૂચના માર્ગદર્શિકા
Zigbee Switch Module-L
1CH,2CH,3CH,4CH
(No Neutral Wire Required)

1CH Switch Module-L

Zigbee 1CH Switch Module L - PartsZigbee 1CH Switch Module L - Symbol 1

ટેકનિકલ વિશિષ્ટતાઓ

ઉત્પાદન પ્રકાર Zigbee Switch Module-L
ભાગtage AC200-240V 50 / 60Hz
મહત્તમ ભાર 1CH: 10-100W
2CH: 2x (10-100W)
3CH: 3x (10-100W)
4CH: 4x (10-100W)
ઓપરેશન આવર્તન 2.405GHz-2.480GHz
ઓપરેશન તાપમાન. -10℃ + 40℃
પ્રોટોકોલ IEEE802.15.4
ઓપરેશન રેન્જ <100 મી
ડિમ્સ (WxDxH) 39.2×39.2×18 મીમી
આઇપી રેટિંગ IP20
વોરંટી 2 વર્ષ
પ્રમાણપત્રો CE ROHS

with a mounting clip

Zigbee 1CH Switch Module L - with mounting clip

ઇન્સ્ટોલેશન

Zigbee 1CH Switch Module L - Symbol 2 ચેતવણીઓ:

  1. સ્થાનિક નિયમો અનુસાર યોગ્ય ઇલેક્ટ્રિશિયન દ્વારા ઇન્સ્ટોલેશન હાથ ધરવામાં આવવું જોઈએ.
  2. ઉપકરણને બાળકોની પહોંચથી દૂર રાખો.
  3. ઉપકરણને પાણીથી દૂર રાખો, ડીamp અથવા ગરમ વાતાવરણ.
  4. Install the device away from strong signal sources such as microwave ovens that may cause signal interruption, resulting to abnormal operation of the device.
  5. કોંક્રિટ દિવાલ અથવા ધાતુની સામગ્રી દ્વારા અવરોધ ઉપકરણની અસરકારક કામગીરી શ્રેણીને ઘટાડી શકે છે અને તેને ટાળવું જોઈએ.
  6. ઉપકરણને ડિસએસેમ્બલ, સમારકામ અથવા સંશોધિત કરવાનો પ્રયાસ કરશો નહીં.

FAQ

Q1: જો હું સ્વીચ મોડ્યુલને ગોઠવી શકતો નથી તો મારે શું કરવું જોઈએ?

a. Please check whether the device is powered on. b. Make sure the Zigbee Gateway is available. c. Whether it’s in good internet conditions. d. Make sure the password entered in App is correct. e. Make sure the wiring is correct.

Q2: આ Zigbee સ્વીચ મોડ્યુલ સાથે કયું ઉપકરણ કનેક્ટ કરી શકાય છે?

such as a ceiling lamp, panel light, etc.

Q3: જો WIFI બંધ થઈ જાય તો શું થશે?

You can still control the device connected to the switch module with your traditional switch, and once WIFI is active again, the device connected to the module will connect automatically to your WIFI network.

Q4: જો હું WIFI નેટવર્ક બદલું અથવા પાસવર્ડ બદલું તો મારે શું કરવું જોઈએ?

You have to reconnect our Zigbee switch module to the new Wi-Fi network accordingly, as per the App User

Q5: હું ઉપકરણને કેવી રીતે રીસેટ કરી શકું?

1. Switch on/off the traditional switch 5 times until the indicator light flashes. 2. Press the reset key for about 10 seconds until the indicator light flashes.

વાયરિંગ સૂચનાઓ અને આકૃતિઓ

  1. કોઈપણ ઇલેક્ટ્રિકલ ઇન્સ્ટોલેશન કાર્ય હાથ ધરતા પહેલા પાવર સપ્લાય બંધ કરો.
  2. વાયરિંગ ડાયાગ્રામ અનુસાર વાયરને કનેક્ટ કરો.
  3. જંકશન બોક્સમાં મોડ્યુલ દાખલ કરો.
    Turn on the power supply and follow the switch module configuration instructions.
  4. Flash after the lights are off. Please attach accessories.

Zigbee 1CH Switch Module L - Symbol 2 ચેતવણીઓ: Do not connect the neutral line; otherwise, it will be permanently damaged.

Zigbee 1CH Switch Module L - Wiring diagram of fittings

1CH Zigbee Switch Module-L

Zigbee 1CH Switch Module L - 1CH Zigbee Switch Module-L

2CH Zigbee Switch Module-L

Zigbee 1CH Switch Module L - 2CH Zigbee Switch Module-L

ફિટિંગનો વાયરિંગ ડાયાગ્રામ (L1 L2 તેમાંથી એક)

Zigbee 1CH Switch Module L - Wiring diagram of fittings 2

3CH Zigbee Switch Module-L

Zigbee 1CH Switch Module L - 3CH Zigbee Switch Module-L

Wiring diagram of fittings (L1 L2 L3 One of them)

Zigbee 1CH Switch Module L - Wiring diagram of fittings 3

4CH Zigbee Switch Module-L

Zigbee 1CH Switch Module L - 4CH Zigbee Switch Module-L

એપ્લિકેશન વપરાશકર્તા માર્ગદર્શિકાZigbee 1CH Switch Module L - QR Codehttp://smart.tuya.com/download

IOS APP / Android APP
Scan the QR code to download the Tuya Smart App, or you can also search the keyword “Tuya Smart” on App Store or Google Play to download the App.
Log in or register your account with your mobile number or e-mail address. Type in the verification code sent to your mobile or email, then set your login password. Click “Create Family” to enter the APP.

Zigbee 1CH Switch Module L - Open the control panelએપ પર ZigBee ગેટવેની કંટ્રોલ પેનલ ખોલો
Before making the reset operation, pls make sure the Zigbee Gateway is added and installed to the WIFI network. Ensure that the product is within the range of the Zigbee Gateway Network.

Zigbee 1CH Switch Module L - Zigbee Gateway

After the wiring of the switch module is done, press the reset key for about 10 seconds or turn on/off the traditional switch 5 times until the indicator light inside the module is flashing quickly for pairing.

Zigbee 1CH Switch Module L - Add sub-device

Click “+” (Add sub-device) to select the suitable product gateway and follow the on-screen instructions for pairing.

Zigbee 1CH Switch Module L - connecting will take about

The connection will take about 10-120 seconds to complete, depending on your network conditions.
છેલ્લે, તમે તમારા મોબાઇલ ફોન દ્વારા ઉપકરણને નિયંત્રિત કરી શકો છો.

સિસ્ટમ આવશ્યકતાઓ
WIFI® રાઉટર
ZigBee ગેટવે
iPhone, iPad (iOS 7.0 અથવા ઉચ્ચ)
Android 4.0 અથવા ઉચ્ચ

Zigbee 1CH Switch Module L - SYSTEM REQUIREMENTS

ઝિગ્બી લોગો

દસ્તાવેજો / સંસાધનો

Zigbee 1CH Switch Module-L [પીડીએફ] સૂચના માર્ગદર્શિકા
1CH Switch Module-L, Switch Module-L, Module-L

સંદર્ભો

એક ટિપ્પણી મૂકો

તમારું ઇમેઇલ સરનામું પ્રકાશિત કરવામાં આવશે નહીં. જરૂરી ક્ષેત્રો ચિહ્નિત થયેલ છે *